Skip to content
Open 24/7 All of Maryland, from Baltimore
Maryland Chimney Sweeps logo Español (443) 659-7036
technician in an orange helmet and safety harness setting a stainless mesh cap on a stone chimney

Chimney Leak Service

Chimney Leak Repair in Baltimore, MD

Chimney leak repair Baltimore homeowners need starts with finding where water enters, then repairing the affected chimney component. We handle leaks at flashing, crowns, masonry and other chimney areas, serving homes across Maryland from our Baltimore base.

  • Open 24 hours a day, 7 days a week
  • Same-day service is available
  • Owner Darren Whitaker has 22 years of chimney and fireplace experience
  • Chimney work has a warranty starting from 2 years

Get a fast quote

Prefer to talk? (443) 659-7036

We only use your details to reply to this request. Privacy

Open 24/7Same-day serviceWarranty from 2 years22 years of experience

Chimney Leak Repair Baltimore Homes May Need for These Water Problems

Water stains near the chimney

Brown marks on a ceiling or wall near the chimney can point to water entering around the roofline or through damaged masonry. The location of a stain is a clue, but water can travel before it shows indoors.

A roof leaking around the chimney

A leak where the roof meets the chimney can involve damaged or separated flashing. We handle chimney flashing repair as well as other chimney leak sources, so the repair can address the affected area rather than just the visible stain.

Dampness around the fireplace

Moisture, discoloration or a musty smell near the firebox may signal water entering higher up in the chimney. Fireplace leak repair begins by checking the chimney and its exterior components, not only the room where you notice the problem.

A damaged crown or masonry

Cracks or worn joints can let water into the chimney structure. Chimney crown repair, masonry repair and tuckpointing are available when those areas are part of the leak.

Water appears after rain

A chimney water leak that shows up during or after wet weather may come from the cap, crown, flashing or masonry. Noting when the water appears and where it shows inside gives us useful clues during the assessment.

Leaks at the top of the chimney

A missing or damaged cap, deteriorated crown or worn chase cover can leave the chimney exposed to water. We can address chimney caps and chase covers, as well as waterproofing when the masonry needs protection.

What Chimney Leak Repair Can Cover, From Flashing to Masonry

  • Check the reported water path — We consider where you see dampness, staining or dripping and assess the chimney areas that could be letting water in. This helps distinguish a chimney leak from water that only appears near the fireplace.
  • Repair chimney flashing — When the roof-to-chimney joint is the source, chimney flashing repair addresses that connection. A roof leaking around chimney flashing may require attention there rather than work on the firebox.
  • Repair crowns and masonry — Cracked crowns, deteriorated mortar joints and damaged chimney masonry can be handled with crown repair, masonry repair or tuckpointing, depending on the affected area.
  • Address caps and chase covers — A damaged or missing chimney cap can expose the flue opening to water. For chimneys with a chase cover, we also offer chase cover replacement.
  • Apply chimney waterproofing — When water is entering through masonry, chimney waterproofing may be part of the repair. The right approach depends on the condition of the masonry and the path water is taking.
  • Handle related chimney repairs — A leak may involve more than one component. Our services include chimney repair, chimney rebuild and leak repair, so the work can address the damaged areas identified during the assessment.

Need help now? (443) 659-7036

How We Trace and Repair a Chimney Leak

  1. Tell us what you have noticed — When you book, describe where water appears, when you first saw it and whether it follows rain. If you can safely do so, note any visible exterior damage; do not climb onto the roof to check it.
  2. We assess likely entry points — We check the chimney areas related to the reported leak, such as the flashing, crown, masonry, cap or chase cover. Water can travel from its entry point, so the indoor stain alone may not identify the damaged component.
  3. We identify the repair scope — Once the affected area is clear, we identify the chimney repair needed and what contributes to the price. The repair may focus on one component or include more than one service when multiple areas are damaged.
  4. We complete the agreed repair — We carry out the applicable leak repair, which may include flashing, crown, masonry or waterproofing work. The time needed depends on the location and extent of the damage and the repair required.

What Changes the Cost of Chimney Leak Repair

The cost depends on where water enters and what needs repair. Flashing work, a damaged crown, deteriorated masonry, a cap or chase cover issue, and waterproofing involve different work. The extent of the damage and whether more than one chimney component needs attention also affect the scope and price.

We provide a quote based on the chimney and the repair required. For more detail about pricing, see how much does chimney leak repair cost in Baltimore, MD. You can book by calling Maryland Chimney Sweeps at (443) 659-7036.

Need help now? (443) 659-7036

Why Maryland Chimney Sweeps Handles Leaks Across Maryland

Owner Darren Whitaker brings 22 years of experience with chimneys and fireplaces to the work. We serve all of Maryland from our Baltimore base, from Baltimore and its suburbs to communities across the state; our chimney repair service covers more than leak work when a chimney has other damage. You can also explore our chimney sweep in Baltimore service or chimney sweep details for related chimney care. Hablamos español.

More on chimney leak repair

Chimney Leak Repair near you

Local pages for chimney leak repair in the cities we serve:

Service area: All of Maryland, from Baltimore · Open in Google Maps

Frequently asked questions

What are common causes of chimney leaks in Baltimore homes?

Water can enter through damaged flashing, a cracked crown, worn masonry, a faulty cap or a damaged chase cover. The source depends on the chimney’s construction and condition, so the place where you see a stain may not be where water entered.

How do you repair a leak around a chimney?

First, the affected chimney areas are assessed to locate the water entry point. The repair then targets that component, which may mean flashing repair, crown or masonry work, cap or chase cover replacement, or waterproofing.

How can I fix a leaking chimney?

The repair depends on whether water is coming through the roof connection, crown, masonry or another chimney component. Avoid climbing onto the roof; note where and when you see water and arrange an assessment so the repair addresses the source.

How much does chimney leak repair cost in Baltimore?

The price depends on the source of the leak, the damage and the repair scope, including whether multiple components need work. We provide a quote after assessing what the chimney needs; the pricing section above explains common cost factors.

Can a chimney roof leak cause water near my fireplace?

Yes. Water can travel inside or along the chimney before appearing near the fireplace, so an indoor damp spot does not always point to the entry location. We assess the chimney areas that could connect the visible water to its source.

What should I do if water is still coming into my home?

Keep people and belongings away from wet areas, and avoid using the fireplace if water is reaching the firebox or its components. Note where the water appears and whether it follows rain, then call to book chimney leak repair.

Book Chimney Leak Repair

Call Maryland Chimney Sweeps at (443) 659-7036 to describe where water is entering and book a repair.

(443) 659-7036 Get a quote