Skip to content
Open 24/7 All of Maryland, from Baltimore
Maryland Chimney Sweeps logo Español (443) 659-7036
technician in an orange helmet and safety harness setting a stainless mesh cap on a stone chimney

Chimney Leak Repair

Chimney Flashing Replacement and Fireplace Flashing Repair in Baltimore, MD

Fireplace flashing repair addresses leaks where the chimney meets the roof. We check the flashing and nearby masonry, then repair or replace damaged sections to help stop water from entering your home.

  • Open 24 hours a day, 7 days a week
  • Same-day service is available
  • Chimney work warranty starting from 2 years
  • Darren Whitaker has 22 years of chimney and fireplace experience

Get a fast quote

Prefer to talk? (443) 659-7036

We only use your details to reply to this request. Privacy

Open 24/7Same-day serviceWarranty from 2 years22 years of experience

What Fireplace Flashing Repair Addresses at the Roofline

Chimney flashing is the material that seals the joint where the chimney passes through the roof. When that seal pulls away, corrodes, or breaks down, rain can get beneath the roofing and show up as a ceiling stain, damp attic, or water near the fireplace.

Our chimney flashing replacement service starts with checking the visible flashing and the surrounding chimney masonry. We identify whether the leak appears to come from the flashing or a nearby issue, such as damaged masonry, then assess the repair needed. The time on site depends on roof access, the condition of the flashing, and whether related masonry work is needed.

A leak can travel before it becomes visible indoors, so the spot where you see water may not be directly below the roof opening. Our chimney flashing repair service focuses on the roof-to-chimney joint and the conditions around it, not just the interior stain.

Three Safe Checks for Chimney Flashing Leaks

  1. Note where water appears indoors — Check ceilings, attic areas you can enter safely, and the wall or fireplace surround for dampness or staining. Write down when you first noticed it and whether it appears after rain.
  2. Look at the roofline from the ground — From a safe spot outdoors, use your eyes or a phone camera to look for a gap, lifted edge, or visible damage around the chimney. Do not climb onto the roof or try to pull or reposition the flashing.
  3. Keep track of changes — Take photos of new stains or visible roofline concerns and note whether the area gets wetter during rainfall. Avoid disturbing loose materials; those details help us assess the leak when we come to your home.

Need help now? (443) 659-7036

Four Common Reasons Chimney Flashing Starts to Leak

Flashing edges have lifted

A separated edge can leave an opening for rain to reach the roof structure. We check the visible joint to see whether the flashing needs repair or replacement.

The metal has corroded or deteriorated

Weather exposure can wear down flashing over time. Corrosion or a damaged section can interrupt the seal, especially where pieces meet.

Nearby masonry has weakened

Cracked or deteriorating chimney masonry can affect the area where flashing meets the chimney. We look at the surrounding masonry as well as the flashing so the source of water is not missed.

Water is entering from another roofline defect

A stain near a chimney does not always mean the flashing itself is the only problem. Checking the surrounding roof-to-chimney area helps distinguish flashing damage from a nearby leak.

What Affects the Cost to Replace Chimney Flashing

The cost to replace flashing around a chimney depends on what we find at the roofline and whether nearby materials also need attention. People asking how much it costs to replace a chimney flashing should know that the condition and access at each home affect the work involved.

  • Extent of flashing damage — A localized damaged section and flashing that has separated across a larger area call for different repair scopes.
  • Roof access and layout — The roof’s shape, height, and access around the chimney affect how the work can be carried out and the time needed on site.
  • Condition of the chimney masonry — If the masonry around the flashing is cracked or deteriorated, that may need attention as part of addressing the leak.
  • Related signs of water entry — Stains, dampness, and the location of visible water help us assess whether the flashing is the likely source or whether another nearby defect needs checking. To ask about the cost to replace chimney flashing, request service and share what you have observed.

Need help now? (443) 659-7036

Service area: All of Maryland, from Baltimore · Open in Google Maps

Frequently asked questions

Is it safe to keep using my fireplace while the chimney flashing leaks?

A roof leak does not by itself show whether the fireplace is safe to use. If water is entering the firebox, you see damage inside the chimney, or smoke is not drafting normally, stop using the fireplace until it has been checked; water can also worsen damage to masonry and nearby materials.

Do you replace chimney flashing in Baltimore?

Yes. We serve Baltimore from our Baltimore base and come to your home to assess the flashing and surrounding masonry. Same-day service is available.

What should I tell you when I call about flashing around my chimney?

Tell us where you see water or staining, when it started, and whether it appears after rain. Mention any visible gap or damage you noticed from the ground; do not climb onto the roof to inspect it.

Can I call about chimney flashing replacement at night or on a weekend?

Yes. We are open 24 hours a day, 7 days a week, including nights and weekends, and same-day service is available.

Request Chimney Flashing Service

Call Maryland Chimney Sweeps at (443) 659-7036 to arrange a home visit. Hablamos español.

(443) 659-7036 Get a quote