Skip to content
Open 24/7 All of Maryland, from Baltimore
Maryland Chimney Sweeps logo Español (443) 659-7036

How Much Does It Cost to Replace Chimney Flashing?

A chimney inspection starts at $39; flashing repair cost depends on the damaged metal, the roof-to-chimney joint, and any nearby water damage. We check the leak source and repair scope, and same-day service is available.

Our Starting Prices in Baltimore

ServicePrice
Chimney sweepfrom $89
Chimney cleaningfrom $89
Chimney inspectionfrom $39
Chimney cap installationfrom $250
Chimney liner installationfrom $899
Gas fireplace servicefrom $49

Need help now? (443) 659-7036

How Much Does It Cost to Replace Chimney Flashing?

A chimney inspection starts at $39. The cost to replace or repair flashing depends on how much metal has failed, whether the joint between the roof and chimney can be repaired, and whether water has damaged nearby materials. There is no confirmed starting price for chimney flashing repair in our listed prices, so the inspection and repair scope matter when assessing the work.

Flashing is the set of metal pieces that seals the place where a chimney passes through the roof. If a section pulls loose, rusts through, or no longer seals against the brick and shingles, rain can enter at the joint and show up indoors well away from the actual leak.

Which Chimney Flashing Problems Can Change the Repair Scope?

The visible drip is only one clue. The amount of flashing that needs attention, the condition of the surrounding roof materials, and signs of water inside the home help distinguish a small repair from more extensive work.

Should the Flashing Be Repaired or Replaced?

The right option depends on the condition of the metal and the surfaces around it. A visual clue from indoors cannot establish whether a repair will hold, so the roof-to-chimney joint needs to be checked.

Repair a limited failure

A repair may fit when the problem is confined to a small section and the surrounding flashing and roof materials remain sound. The inspection should identify the failed point rather than treating only the interior stain.

Replace deteriorated flashing

Replacement is the more suitable direction when metal is split, rusted through, or failing across multiple sections. The scope also needs to account for how the new flashing will meet the chimney and roof.

Inspect before choosing

Choose an inspection when the leak source is uncertain, the stain returns, or the flashing is hard to see safely. Our chimney flashing repair service addresses the roof-to-chimney joint, while an inspection helps identify what needs attention.

Need help now? (443) 659-7036

How to Check for a Chimney Flashing Leak From the Ground

Use these checks to gather useful details without climbing onto the roof or removing any roofing. They can help you describe the problem, but they do not confirm which part is leaking.

  1. Note when the leak appears — Write down whether water shows up during rain, after rain, or even in dry weather. Check whether the stain grows during a storm; this timing helps distinguish an active leak from an old mark.
  2. Locate the indoor stain — Record whether the mark is on the ceiling, wall, or near the fireplace. Note its distance from the chimney so the inspection can relate the indoor symptom to the roof area.
  3. Check the attic only if it is safely accessible — From a safe, stable floor area, look for damp wood, water tracks, or wet insulation near the chimney. Do not step on ceiling joists or move insulation around a hot flue.
  4. Look from the ground — Use the ground to check for visibly loose metal, missing shingles, or damaged masonry around the chimney. Binoculars can make details easier to see; do not use a ladder or walk on the roof.
  5. Keep a record of the change — Take a photo of the interior stain and note the date and weather. Compare later photos to see whether the mark is spreading or staying the same.
  6. Keep the fireplace out of use if water reaches it — Water near the firebox, flue, or fireplace components needs professional attention before you use the system again. Do not remove parts or try to dry the inside of the chimney with a fire.
  7. Arrange an inspection — Share the location of the stain, when it appears, and what you could see from the ground. A chimney professional can inspect the flashing and check whether the leak has affected nearby materials.

Which Starting Prices Apply to Common Flashing-Leak Situations?

A suspected leak does not automatically mean the flashing needs replacement. These examples show which listed starting prices may apply to related work, without treating an inspection or sweep as the cost of a flashing repair.

When you see a recurring ceiling stain but cannot identify the source, a chimney inspection starts at $39.

When water has entered the chimney and you also need soot or creosote removed, a chimney sweep starts at $89. Sweeping is separate from flashing repair and does not fix a roof leak. See our prices for the confirmed starting prices of other services.

What Happens During a Chimney Flashing Repair Visit?

The visit begins with locating the leak and checking the flashing, the roof-to-chimney joint, and nearby materials. The time needed depends on roof access and whether the work is limited to the flashing or includes damage around it; an inspection and a repair requiring replacement are not the same scope.

Darren Whitaker, the owner, has 22 years of experience with chimneys and fireplaces. We come to your home, and you can request service by calling (443) 659-7036 or using our contact page. We are open 24 hours a day, 7 days a week, and same-day service is available.

Need help now? (443) 659-7036

When Should You Call a Chimney Sweep About Flashing?

Arrange a professional check when water appears near the chimney after rain, when an interior stain grows, or when you can see loose or missing flashing from the ground. A leak can travel along roof materials before appearing inside, so the location of a ceiling mark may not match the failed joint.

Do not climb onto a wet or steep roof to inspect flashing, and do not cover the area with household sealant as a substitute for finding the leak. If the problem includes water inside the fireplace or visible damage around the chimney, stop using the fireplace until it has been assessed. For chimney sweeping and other fireplace care, see our chimney sweep in Baltimore page.

Frequently asked questions

Can chimney flashing be repaired instead of replaced?

Yes, a limited failure may be repairable when the surrounding metal and roof materials are still sound. Split, rusted-through, or broadly deteriorated flashing can call for replacement instead, so the joint needs to be checked before choosing.

How can I tell whether a chimney leak is coming from the flashing?

A stain that appears or grows after rain can signal water entry, but it does not identify the exact source by itself. Note where the water shows up and whether you can see loose or missing metal from the ground, then have the chimney and roof joint inspected.

Does chimney flashing repair include checking for water damage?

The repair scope should account for nearby materials, not just the visible metal. Ask for the roof-to-chimney joint and the area around it to be checked so damage beyond the flashing is not overlooked.

Can I seal a chimney flashing leak myself?

Do not climb onto the roof or apply household sealant as a permanent fix. A surface patch can hide the visible opening without addressing failed metal or water-damaged materials beneath it.

Get the Chimney Leak Checked

Call (443) 659-7036 or contact us to arrange a chimney inspection or flashing repair.

More helpful guides

(443) 659-7036 Get a quote